Clik here to view.
how to retain Maximum layer count in Library in PADS ??
Hi everyone,i created decal in pads l. unfortunately,i assigned Maximum layer count.but i need to disable it.so is it possible ??
View ArticleRe: xPCB Draw Object Snap Grid problem
sorry, I not have accounts for Support. another, I unable add file in here. The link is video and file, whether or not help me submit to supportnet.mentor.com? Thank! http://pan.baidu.com/s/1dDo7yLV...
View ArticleRe: Layout translation from Altium
Carlos, Did you try to reduce the the design area in Altium before translating? If you are still having problems after reducing the area in Altium, please contact Mentor customer support as they are...
View ArticleRe: Layout translation from Altium
Yan, I don’t have Altium. If I did, I’d just make the modifications in Altium and not worry about translating to PADS. The file was provided by my customer who got it from another consultant. I...
View ArticleRe: Suddenly unable to have multiple software keys / dongles inserted...
A Quick Fix for the ProblemQuite by accident, I've found a way to make multiple dongles work together, at least on my system: Turn off systemRemove all keys from the system, except for the Pads...
View ArticleRe: xPCB Draw Object Snap Grid problem
I would suggest using the link below to register for Support Net and it will allow us to better help with the issue you are seeing. https://supportnet.mentor.com/register Thanks, Vern
View ArticlexDX Designer Part Lister missing components
Does anyone know how to fix a problem where the parts lister in the integrated DX Design flow outputs a .csv file with no components? I'm using the DefaultCSV file, changed the delimiter to a comma and...
View ArticleRe: xDX Designer Part Lister missing components
FYI: Here's the default list, which excludes most of they parts I pulled from the ODA Starter Library:...
View ArticleClik here to view.
Electrical System Design and Harness Engineering Feedback
Search does not appear to be working. Regards,Pat
View ArticleRe: Electrical System Design and Harness Engineering Feedback
Thanks, Pat – someone else pointed this out to me this afternoon. I will look into it right away.
View ArticleRe: xDX Designer Part Lister missing components
You cannot set the delimiter to comma. This will destroy the CSV Format because the ID is seperated by comma. 9 Components $1I51,$1I52,$1I53.... the components will be created as a comma seperated...
View ArticleRe: xDX Designer Part Lister missing components
Thank you for the information. It didn't fix all my problems, but it will at lease reduce my problems by one. I reran using the | delimiter and opened in a txt editor and am still missing all the...
View ArticleRe: xDX Designer Part Lister missing components
Without seeing the Design it is very hard to identify any causes.What I see the last time is:If the "LEVEL=STD" Property is set to "LEVEL=Standart", the Part is missing in the Partlist. What I...
View ArticleClik here to view.
Through-Hole Libraries?
Hello, I am currently making a board in DxDesigner and I need to replicate it from Eagle. This schematic uses this 40 pin header(MA20-2) from a library(con-lstb.lbr) that comes with Eagle when it is...
View ArticleRe: Electrical System Design and Harness Engineering Feedback
Working fine now I see - thank you!!
View ArticleClik here to view.
Re: Electrical System Design and Harness Engineering Feedback
Yes, finally. It took some time for them to find the issue, then it required a restart. I had put an announcement up on the home page about the temporary maintenance that occurred. I am just glad it is...
View ArticleClik here to view.
Shielding in 3D
Hi! I've made a shielded (coaxial) cable with an SMA connector at both ends, I'd like to make a 3D harness of it in Creo. Well the main problem is, that if I connect the shield to one of the pins...
View ArticleRe: Can I use Digi-Key's Designer Schematic as a front-end tool to Xpedition...
We have a customer who is looking to replace his old Power Logic schematic software and doesn't want to spent a lot of money for his schematic software.The schematics that they make are not very...
View ArticleIs there a way to switch off "Mounted" or "Opposite" layers in a through hole...
I am attempting to create a Decal for a through hole component in Pads Layout. The board that this component will go on is double sided however I do not want pads on both sides of the board for the...
View ArticleRe: Can I use Digi-Key's Designer Schematic as a front-end tool to Xpedition...
If you don't need Forward Annotate or update the original schematic, you can open Designer Schematic project with xDX Designer and then export a keyin netlist.It's a one way flow since once you have...
View Article