Clik here to view.
Re: Through-Hole Libraries?
Hi Marissa, There is a starter library of about 11k parts available from Optimum Design Associates (ODA) - this may have the connector you need: Optimum Part Libraries for PADS - Mentor GraphicsDEMO...
View ArticleRe: Following a direct link to a restricted Community space may result in...
This has now been fixed.
View ArticleClik here to view.
Re: Is there a way to switch off "Mounted" or "Opposite" layers in a through...
MOdify the pad in question to have a pads smaller then the drill and select non plated YAn
View ArticleClik here to view.
How to fix the Decal Wizard in Layout and Option in Logic Problem
if you download image file and see, you know i have big problem...maybe.as you see window is too small that one part don't see....i try to solve this but i don't made it(i already remove and istall...
View ArticleRe: Shielding in 3D
Most users typically do a sync from the VeSys wiring design to the VeSys Harness design to bring the multicore structure to the harness drawing, and they just need for the parent MC outer diameter to...
View ArticleClik here to view.
Replacing existing vias
Hi all,There are about 200 vias in my design which need to be replaced by a different padstack. How can I get this done without changing them one by one ?Thank you
View ArticleHow to check for maximum clearance?
I have a High Voltage board and the minimum net to net clearance is 0.2 mm, but the maximum clearance can not be greater than 0.31 mm.Is there a way to check or make a list if the clearance for 2 nets...
View ArticleRe: Is there a way to switch off "Mounted" or "Opposite" layers in a through...
I have actually done that. I have my correct pad on the "opposite" layer and have set the pad size on the "Mounted" layer to 0. However, if I choose "non-plated" I get Connectivity issues when running...
View ArticleRe: xDX Designer Part Lister missing components
Why are you using the delimiter with csv, it should open in Excel without this? Generally only use the delimiter for text outputs.Can you provide the configuration file you are using (the *.ipl file)....
View ArticleRe: Export Expedition library parts to other formats
The symbols are just ASCII files so no need to 'export' them.
View ArticleRe: xDX Designer Part Lister missing components
The delimiter hasn't made a difference but I was trying different options in hopes that the excel or text output would include all the data. It's odd that the ODA Starter Library components are the...
View ArticleRe: xDX Designer Part Lister missing components
Jason,Not sure what format you are trying to produce but that ipl file has too many primary/secondary key combinations. Without the design it is difficult to determine why parts are missing but if you...
View ArticleRe: xDX Designer Part Lister missing components
Try this and see what you get: <?xml version="1.0"?><PartListerConfiguration version="3"> <Entry name="description" value="DefaultCSV"/> <Entry name="outputFormat" value="PLAIN"...
View ArticleRe: xDX Designer Part Lister missing components
There is a TechNote that discusses several reasons why parts go missing on a Partlist. TechNote mg580034. Like Angelo said, I'm also pretty sure it is non-common properties. ManufacturerPN isn't a...
View ArticleRe: xDX Designer Part Lister missing components
Robert, Thanks Robert. I tried your ipl and got all my parts! I'm not sure why the default file did not work but I've got a complete BOM now.
View ArticleTest post - pls disregard
This post is just a test of our system and will be deleted shortly.
View ArticleRe: Batch SI Simulation Measured at the Die?
Yes, there is a possibilty: add "Timing_Location Die" in the IBIS file below the [Component] statement .[Component] VIRTEX7Timing_location Die[Manufacturer] Xilinx Inc...
View ArticleClik here to view.
Re: Replacing existing vias
Hi ishara,You can use Padstack Processor (Edit > Modify > Padstack Processor) to accomplish this.
View ArticleRe: Batch SI Simulation Measured at the Die?
That did the trick, thank you! While researching the "Timing_location" keyword, I also came across the "Si_location" keyword. I tried playing around with it, but it didn't seem to change anything. A...
View ArticleScript to export items from library?
HiAnyone know how to create a script that will scroll through the libraries and export attributes to an Excel spreadsheet?For example as showed in the attached image. RegardsKlaus
View Article