Re: Modeless Command Angle, current status
Chuck,Here is code actually using the dialog box as you suggested... If OptionsDlg.DesignDlg.LineTraceAngle = 2 ThenOptionsDlg.DesignDlg.LineTraceAngle =...
View ArticleRe: Modeless Command Angle, current status
There is a macro command to open the options dialog (in case is not already open): Application.OpenOptionsDialog() but it doesn't work for me... IDK
View ArticleRe: what is the right way to short 2 nets with different names
Yes, it is not a perfect solution.We get DRC error, but just have to tell manufacturer that it is an intended short.How we work - we send gerber/fabrication data to manufacturer who look at it and...
View ArticleRe: Modeless Command Angle, current status
True. It seems to work with this: Application.ExecuteCommand("Global Options")OptionsDlg.ActiveTab = "Design" The problem with relying on the macro to open the Option dialog box is that it slows the...
View ArticleSymbol / Cell Preview
Hi All, I use Xpedition VX1.1 update 6From xDM Library Tools, i run Part EditorI select a part, i select Pin Mapping and click on Symbol / Cell PreviewI see only the cell, the symbol is not visible...
View ArticleRe: Symbol / Cell Preview
Hi Robert, Yes i have Regards Bruno HENRY CADinformatique De : robert_davies Envoyé : mercredi 6 janvier 2016 16:09À : Bruno HenryObjet : Re: - Symbol / Cell Preview...
View ArticleRe: Symbol / Cell Preview
I think this is as working as designed.You are opening the library from within the pcb tool - therefore the symbol view and editor is not available.Similar to if you open the library tool from within...
View ArticleRe: Symbol / Cell Preview
I open the LMC directly from the xDM Library Tools not from xDX or xPCB ! Bruno HENRY CADinformatique De : greg.hall Envoyé : mercredi 6 janvier 2016 16:21À : Bruno HenryObjet : Re: - Symbol /...
View ArticleClik here to view.
Re: Symbol / Cell Preview
Ok, the only other thing I can think of is whether you have the partition search paths set correctly.Located under Setup -> Partition Search Paths.Each of your symbol partitions should be selected...
View ArticleLayer Toggle
Have you ever wanted to quickly switch to a different layer while routing? Of course you have, F4... Duh! What if you want to switch to a layer that isn't part of your current layer pair,...
View ArticleRe: what is the right way to short 2 nets with different names
its sure a kind of problem which make always a deley in pcb mnufecturing since we have to deal with many qustions of the manufcturer
View ArticleRe: Modeless Command Angle, current status
I'm going to use the Select Case version along with your Global Options stuff. It only seems slowish the first time, and I won't use it all that often anyway... I'll probably just use OK instead of...
View ArticleL-Edit keyboard shortcut key for drawing boxes
Hello, I am working with L-Edit Win64 15.23. I very frequently switch from selection mode after drawing a box by hitting the Esc button and then go back to drawing boxes but hate to have to click on...
View ArticleRe: Symbol / Cell Preview
Setup > Partition Path is correct … but there is always the problem Bruno HENRY CADinformatique De : greg.hall Envoyé : mercredi 6 janvier 2016 16:36À : Bruno HenryObjet : Re: - Symbol / Cell...
View ArticleClik here to view.
xPCB Layout (Expedition PCB)启动速度慢，花费数分钟？
添加环境变量：MGC_DISABLE_PRESPLASH_CHECKS=1 简化License验证过程，提高工具启动速度。
View ArticleRe: How to distinguish 'Plow Mode' and to 'get the trace object' selected...
Hi all,I also am interested in the question.Could some Mentor Automation expert answer or give some advice?Thanks.Best Regards,Bortolo
View ArticleRe: what is the right way to short 2 nets with different names
You can use small pieces of copper with a copper bridge between them. End your routes in the copper areas. No DRC Errors. But very clunky and difficult to work with. I have created a few shorting...
View ArticleHow to create project in PADS VX that can be read in PADS 9.5
Hello I have to create a project in xDX Designer using PADS VX that must be editable in PADS9.5. I understand that constraints file (cns) and PCB configuration file (cfg) should be following:...
View ArticleComparing ODB++ Files -
Does anyone know of a tool or method to be able to compare 2 different ODB++ files against each other? We have been using gerbers since the dark ages and the PCB Design team is finally moving towards...
View Article