Re: how to create custom off page symbol in pads logic ??
Thanks for your reply.let me know what is lines ?? i found some template sheet is available let me know how to create the template sheet ??For creating custom offpage i need to create in parts option...
View ArticleRe: issue in Library part creation in pads logic ??
Try updating your part in the schematic; it sound like it is out of date from the changes you made in the library. FWIW - I define a CAP_0402 part and a CAP_0603 part to avoid issues in the design...
View ArticleRe: how to create custom off page symbol in pads logic ??
Lines are non-connected things that you show on the schematic, like borders, titleblocks,stack up notes, etc. You can just draw them on the schematic, but if you want to save them in a library then...
View ArticleRe: identify every instance in netlist from Layout
I am sorry; I don't use Virtuoso so can't give any advice. I thought perhaps this was an LVS question, or maybe parasitic extraction. Mostly I work with rule files and just use the GUIs to look at...
View ArticleHow to Teardrop traces
Using Expedition 7.9.1 Have a large track which need to neck down/teardrop into a pad - how do I do this? From what I see the standard settings in expedition teardrop pad-to-trace this is not what I...
View ArticleClik here to view.
how to change the Diff Pair trace widht ??
Hi ,i set the differential pair for my design.i could not change the trace widht for assigned pair.in default i keep min trace width is 4mil and max is 25mil.if i assigned differential it is...
View ArticleClik here to view.
Re: How to Teardrop traces
Hi Greg, as far as I know there is no way to do this with the teardrop option. 1) What you can do is to segment the tarce and progressively use smaller trace widths. something like the picture 2) add...
View ArticleRe: identify every instance in netlist from Layout
Can you please share like how you do that maybe with an example or something else? I just want to get it done, doesn't matter how. Thanks! Varun
View ArticleClik here to view.
Pads Layout Viewer can not set max layers
I just installed Pads Layout Viewer, it seems many functions at Layer Definition tab were disabled. I have some asc board layout file shows following error. what can i do?
View ArticleRe: how to change the Diff Pair trace widht ??
You can't set the trace widths of a diff. pair to be less than the design rules. So somewhere in your settings you have a rule for a 6 mil trace width for those nets, and that is what needs to be...
View ArticleClik here to view.
Re: Sub-component problem
Hello Have you set your Styleset to display the Additional Component?This will be under the Connector - Decoration - Related Entities - Additional Component - Symbols - set a default.If you have set...
View ArticleRe: RegisterErrorExpression 오류 문의 드립니다.
본사 커뮤니티의 답변 중 'ScriptEngine'을 efm에서는 'ScriptThis'로 바꾸어 사용하라는 내용이있는데요 한번 적용해보시기 바랍니다.
View ArticleRe: Pads Layout Viewer can not set max layers
If you cannot change the layer definition to maximum layers in PADS Viewer, you can install the PADS Full version , open it in demonstration mode, change to maximum layer mode and import the ASCII...
View ArticleClik here to view.
Re: Sub-component problem
Hi! I can't see the picture, you've inserted, but unfortunately I cant find the related entities, in the style sets. As you can see in the picture below, I don't have such option. I don't know how is...
View ArticleClik here to view.
Re: RegisterErrorExpression 오류 문의 드립니다.
Efm의 모든 Object에는 클릭, 더블클릭 등의 이벤트를 연결할 수 있습니다. Efm에 text object를 놓고 적절한 표현을 한 다음, 이벤트 중 EventClick 또는 EventDblClick 에 아래와 같은 구문을 넣는 방법이 유력해 보입니다. 예를 들어 특정 text를 마우스로 클릭할 때에 인터넷 익스플로러를 여는 hyperlink를 만든다면...
View ArticleClik here to view.
dqss early failure
hai i simulated a layout with p2040 and 5ddr3(4+1ecc) in 1333 mbps i found that all the nets are passing and only dqs is listed in violation dqs 0,1,2,3 are getting failed and 4,5,6,7 are...
View ArticleClik here to view.
Re: Sub-component problem
Hi LaszloSorry about the picture - not sure why that did not appear correctly.However, now that you have mentioned your tool is VeSys, the answer is sorry - the Related Entity item in Styleset is only...
View ArticleClik here to view.
Re: Sub-component problem
Hello! I'm adding the sub-component for the connector in the "Component Maintenance dialog", as part of the housing, like in the picture below. This way I get the "extra" table in the harness design,...
View ArticleClik here to view.
Re: Loss of relationship between differential pairs
Hi,when you start expeditionPCB you can select/ deselect the High Speed Design Option!I use EE7.9.3.Michael
View Article