Re: Using Constraints to Make PCB Layout Easier
If anyone wants to have me present to your design group my Design methodologies and CES setups please let me know. I have been onsite to approximately 40 company sites or more explaining how to use CES...
View ArticleClik here to view.
Re: How to define clearance for a net or a part
By adding a Scheme (rule-by-area) should allow the user to define smaller trace to pad values in the design. Very simple to do with CES. After you create the Scheme (rule-by-area) just add the...
View ArticleClik here to view.
Re: Trim problem in xPCB Layout VX.1.1
All you have to do is move the arc a little bit and it starts to work. So I am not sure how it was created but it now works. So how was the data actually created and was the arc modified at anytime?...
View ArticleRe: DESIGNrev scripts to share
Hi Chris I am interested in 7, changing the database from GDS to OAS ThanksAbrar
View ArticleRe: Tessent Shell: Path detail for transition fault report
Hello Ana, Yes, actually that answers my question, thank you
View ArticleNEW LAYOUT PAD STACK EDITING CAPABILITIES in VX1.2
I like the new pad stack editing capabilities in layout. It is nice to be able to copy and past from one layer to the other and to other pins. Is it just my install or where is the same capabilities in...
View ArticleDrawing Editor Display Order
Is there a way to change the order layers are displayed in? Currently I have created a user layer with some call outs, but they are displayed in a way that they show up under other components. I would...
View ArticleRe: Importing Components List (BOM) from Excel
HiYes, you can do it easily even from Excel level.You just need to modify MDB file - it is a database that holds all parameters of your library. When you modify parametric data, you modify this...
View ArticleClik here to view.
Harness Level Mapping issue in Generative Flow
Hi:We just find a problem when we mapping harness level from integrator design to harness XC,details as following PicsCapital Version: Capital 2014.1, The IP harness levers are defined by Integrator...
View ArticleClik here to view.
Re: Trim problem in xPCB Layout VX.1.1
IthinkI seem tofindsome rules, such as the followingfigure,ifone end of thearcand one end ofthe linejustconnected together(after suchexecutionTrim),thentheycan not performthe other endTrimcommand, that...
View ArticleWhy can I not specify padstack in Die Wizard?
Hello, I am trying to place pins using the Die Wizard. I have created my CSV in Excel and specified the Import from file... options correctly (I can see in the Pin Data window all the pins and their...
View ArticleRe: NEW LAYOUT PAD STACK EDITING CAPABILITIES in VX1.2
Hello, Pad changes on multiple levels and Copy/Paste in also available inside Decal Editor. A small change but a HUGE productivity enhancer. Regards, Yan
View ArticlexDX Designer VX copy problem
xDX Designer VX.1.1, each copy of thepart, output Tab willappear"Selected objects contain constraints that will not be copied",why is therethis? How to avoid it? Thank you!
View ArticleRe: NEW LAYOUT PAD STACK EDITING CAPABILITIES in VX1.2
Yan, Don't see any new copy and paste options in decal editor in VX1,2. Where is it hiding? Control C and control V don't work either.
View ArticleRe: NEW LAYOUT PAD STACK EDITING CAPABILITIES in VX1.2
In Decal Editor add couple of terminals. Select terminal > Properties and you will see it Tegards, Yan
View ArticleClik here to view.
Re: Harness Level Mapping issue in Generative Flow
Hello Denglong The differences I see are, per Level, (1) missing LF03 (2) additional IA01, LD02 (3) missing LF03 (4) missing LF03 Without seeing the data, the best guess I can make is that you had...
View ArticleRe: how to auto select splice and heat shrink sleeves PN?
Hello Louis I'm unsure what you mean by not being successful, but have you set the Insulation Type on the Splice within the Property of the Splice? You also need to have Splices availble in your...
View ArticleClik here to view.
Clik here to view.
Re: Three different symbols(different number of pins) (in DxDesigner...
Create the three symbols, In the Pin Mapping Window, add the three symbols to the part. If the pin numbers are on the symbol you can add them automatically.otherwise you have to select the symbol...
View Article