Hello Louis
I'm unsure what you mean by not being successful, but have you set the Insulation Type on the Splice within the Property of the Splice?
You also need to have Splices availble in your Library that are appropriate for the
- Min/Max number of wires
- Min/Max Total CSA
- Min/Max Single Wire CSA
- Max number of Wires Per Side
- L/R CSA Ratio
- Auto Selectable
You have Customer setting on the diagram and need to have the same Customer part number for the part.
Those are a few things to check. If that does not resolve your issue, please log an SR and provide sample data if possible.
Regards,
Pat