Re: How to create more substrates between 2 signal layers in Stackup Editor...
Hi Matija, Thanks for the answer.I already supported this idea on August 28 2013.Sad to see that this item is (2 years ) still "under consideration". Regards,Wim
View ArticleRe: Error on generation of Cadence Allegro 15.Xx netlist generated from DX...
Ok. We will initiate the thread with support team. meanwhile I have generated netlist for PADs. it is generating netlist with 0 error. I have put below property in attribute DEVICE = our parts 10 digit...
View ArticleGathering ground information
Hello all, I've written a plugin that can be ran on a buildlist, which output all ground devices and their properties in a csv file.For some reason not all of the grounds are being captured. When I...
View ArticleRe: Error on generation of Cadence Allegro 15.Xx netlist generated from DX...
I can not able to import below Ascii file ====C1 184-0518-070@CT2917C2 184-0518-070@ct2917=== But I am able to import below ascii file in pads====C1 CT2917C2 ct2917 Can you please guide me am I missing...
View ArticleRe: Gathering ground information
John,Is it possible that some of your grounds don't have any user-defined properties defined? If so, they won't be output at all.Simon
View ArticleRe: How to install 2 versions of PADS (9.3 and 9.5) in 1 computer
Michael, You can install multiple versions of PADS on the same machine but you cannot run multiple versions at the same time. You install both versions into the same root folder (e.g.:...
View ArticleRe: Gathering ground information
Hi Simon,Yes, this is the case on most of the missing. Thanks!
View ArticleRe: Error on generation of Cadence Allegro 15.Xx netlist generated from DX...
I think, I have solved the prob. In my lib Part type and decal name are same. While Part type should be 184-0518-070 and decal name should be CT2917. I tried with one component and it able to import...
View ArticleClik here to view.
Re: Script to check the shorts in layout with SVRF language
Here is a technote on SupportNet that might help:...
View ArticleFinding net length in calibre
Hi,I need to write rule file to find the length of the net connected to the port. I've been looking around the manuals but can't find an example. Would you please help? Thank you,--Binh Pham
View ArticleRe: Finding net length in calibre
Binh - thanks for your question. I am going to move it to the Calibre community for better visibility and quicker response.
View ArticleClik here to view.
Re: How to install 2 versions of PADS (9.3 and 9.5) in 1 computer
Thanks. I will try.If have any trouble, I hope you can continue to help me
View ArticleClik here to view.
Re: Script to check the shorts in layout with SVRF language
Hi Samantha,thank you, but I have some problems to read your replay. When I try to connect to your links, I have this message:Can you check, please?Thanks for allLiano
View ArticleUpdating scripts from 7.9.x x86 to Xpedition x64
We are looking to update to x64 VX in the near future. I am working on updating my script's references as I write my code in C# as much as possible. My scripts were originally in x86 so I've also...
View ArticleRe: Updating scripts from 7.9.x x86 to Xpedition x64
Do you have your menu items launching the executable using MG Launch or MGC Command Window? If you don't, then they have no clue as to what the Mentor tools are.
View ArticleRe: Updating scripts from 7.9.x x86 to Xpedition x64
Nope! Do you have any documentation you can point me to? I have a vbs file that populates the menu items and then they do stuff like thisbutton1.ExecuteMethod = "LaunchViaFinder" Sub...
View ArticleRe: Updating scripts from 7.9.x x86 to Xpedition x64
Unfortunately, I have not done it myself but this technote should get you started: https://supportnet.mentor.com/portal?do=reference.technote&id=MG586272&lang=en&prod=C107-S123-G145-P10233
View ArticleExporting PADS 9.5 Files to 9.0
How do you export Mentor Graphics Designer Layout files to legacy PADS 9.0? Layout can create these files: .pcb, . dnf, and .csv. PADS needs .ascii. - RW
View ArticleRe: Exporting PADS 9.5 Files to 9.0
Hello, Just export as an ASCII file to PADS 9.0. Regards, Yan
View ArticlePADS VX.1.2 Beta
Hello, We are happy to announce the availability of PADS VX.1.2 Beta. This release includes new 3D capabilities for PADS Standard and Standard Plus, including STEP import and export. To participate in...
View Article