can i load dxd VX1.2 sch on VX1.1 installation?
i got shematics in VX 1.2 but i have only VX1.1 can i load it?
View ArticleRe: DxDesigner: Resistor array created as hetero gates gets different REFDES...
How this will work with integrated flow and Central Library? (PADSVX.1.2)
View ArticleRe: Cell without pads
Krzysztof,Like Greg said, a mechanical cell is a good way to do it. No, it will not appear on the BOM unless you are using an older version of the tools. ~EE791.In these older versions the Forward to...
View ArticleRe: DxDesigner: Resistor array created as hetero gates gets different REFDES...
The hetero is implicit within the mapping in the central library - though some hetero types are currently not supported by the architecture implemented in PADS (hetero 3 and 4). Assuming it is one of...
View ArticleRe: install virtual license server
David, thanks fro your answer everything is working now with the new license. Thank you for your help Radek
View ArticleClik here to view.
Contributions/Progress erased
Why was my profile level reduces to 0 when I was a top contributor in the xpedition forum?
View ArticleRe: Contributions/Progress erased
One week ago a new reward system was introduced (You received this information also in your Notifications Menu)The whole system was reworked.I think they set every user back to 0 so everybody can start...
View ArticleRe: API/x2ml add Functional Module Codes
Well, I found the solution:You can add Functional Module Codes with a Bridge In Plugin (Bridge Processor) using the x2ml API. Instead of writing connector.setModule("FM1"); you have to...
View ArticleRe: Can anyone give me the list of control names in the odb++ dialog?
I found that changing ODBSetup.eocf and ODBSetup.ocf files in the Config folder before actually running ODB++ output you can get access to the different options. So I setup an event handler that would...
View ArticleRe: How Can I use an Existing PCB design with a New Schematic
Well if they are that similar, i would do the following.1. Open the new Empty PCB2. On the Empty one go to File open as Reference and open the Design you wannt to copy from.3. Select everything you...
View ArticleClik here to view.
Re: Add Special Component, reload List/Setup-Settings
Hi juergen,thanks a lot. But (see below) The list was after this command enhanced with the new Special components was found in the speccomp.ini.And this works good. see picture... But the list in "My...
View ArticleClik here to view.
Re: DxDesigner: Resistor array created as hetero gates gets different REFDES...
Thanks for the fast response! But this will not solve my problem. We are using xDX Databook and get the parts by drag-and-drop from there.With the central library we are only getting one symbol for one...
View ArticleRe: Can anyone give me the list of control names in the odb++ dialog?
Issac; Use the Automation Pro Engines to drive the output. Here is an example Ian wrote for ODB++.Rename this to .vbs and check it out. -kendall
View ArticleRe: DxDesigner: Resistor array created as hetero gates gets different REFDES...
The part you are trying to create is a Hetero Type 4 which unfortunately isn’t currently supported in the PADS integrated flow, you will have to create two separate parts to manage the two use...
View ArticleRe: Meaning of "Allow one additional via per SMD pin" at the Editor Control
regarding your question about "contradiction", I think it would be helpful to remember that the "one additional via" per pin was probably intended to allow the designer to make better power plane...
View ArticleRe: DxDesigner: Resistor array created as hetero gates gets different REFDES...
Ok, I also found the hetero type description here: https://supportnet.mentor.com/portal?do=reference.technote&id=MG583318&lang=en&prod=C115-S115-G145-P10233 Is this a "feature" like a bug...
View ArticleRe: DxDesigner: Resistor array created as hetero gates gets different REFDES...
It is missing functionality rather than a bug, at some point it will be addressed for the PADS flow. Sent from my HTC
View ArticleRe: Contributions/Progress erased
Mike/Philipp That is correct, a new reward/gamification system was enabled about a week ago, but inadvertently . The new system is not fully defined, so it was turned on a bit prematurely. We are...
View ArticleAdding Company Logo to Schematic Border Symbol...
Good afternoon folks, I am trying to get a nicer version of our company logo into the Sheet Border Symbol for our scabmatics. I am using VX 1.2 with the Netlist Flow into PADS. I do not have PADS...
View Article