I'm new to creating a layout. I am trying to forward my schematic to PCB but I'm getting an error.
The Process Indicator is all checked out. There are no errors in the PCB.ERR file.
The errors are in the ascii.err report.
Can't find part Type item
*Part name not found
*Bad *CONNECTION* ascii data format, nets must contain more than one pin. Signal GND
ATTRIBUTE VALUES
Error: Component J1 not found
Warning: deleting signal GND
**INPUT WARNINGS FOUND**
These errors are repeated for all components and signals.
The PADS Status shows:
Reading file -- ...
Converter\Boost.asc-- version 2007.*
**INPUT WARNINGS FOUND**
ASCII import/export report file saved -- C:\PADS
Projects\ascii.err
I checked my schematic. All components attributes look good. The schematic netlist came with no errors. What should I look at?