Re: Dimensions changing after printing.
I find out the problem. Its Fonts. If i use veribest gerber font im in trouble, with for example Arial is no problem.
View ArticleMulti-layer Rigid-Flex Expedition Layout / Gerber output?
Good morning, Can Expedition 7.9.5 facilitate multi-layer rigid-flex layout, specifically preventing gerber output for connector pads on middle layers? Burying SMD pads works great but through-hole...
View ArticleClik here to view.
Re: MC conductor lengths
Hello, I wanted to follow up on this question. I tried adding a length change value to the individual wires cut shorter within the multicore, but still had no success having the correct length reflect...
View ArticleRe: Dimensions changing after printing.
I remember having this issue with the VeriBest Gerber 1 font and like you, I just switched to Arial since that data wasn't on any of the silk layers
View ArticleClik here to view.
Routing signals through a junction slot
Hello all, If I created a ground network that was created by combining a bunch of ground signals by a common property, can the subsequent wires be routed through a junction slot "automatically" when...
View ArticleCalibre RVE opens a new layout window
Calibre RVE is opening a new layout window for every highlight. The Calibre DRC job was submitted through Calibre Interactive so the socket is open and the context is correct. This is new behavior and...
View ArticlexDX Designer - Grid Spacing for Text Comments
In xDX Designer, how do I change the grid spacing for text comments? I want this grid spacing to be different than the spacing for other objects such as nets and components. Thanks!
View ArticleRe: Does DxDesigner navigator have an API
This is great Patrick. Thanks for showing how to use Application.QueryPages to return the sheet order as displayed in the Navigator.
View ArticleSettings > Display (category)">I cannot see "Xref Annotation" option in Setup > Settings > Display (category)
Hi all, I want to enable cross reference for my schematic. I refer the documentation on info hub and I couldn't find any option called " Xref Annotation " under Setup > Settings > Display...
View ArticleGuidance on RipperSignalInfo
Using VX.1 DxDesigner/Expedition Flow. On a design we have several buses, however on one of the buses the RipperSignalInfo does not seem to appear with the correct signal name, can someone explain why...
View Articlevsim elaboration with UVM tests
Hi all, I have a SystemVerilog UVM environment and I use elaboration with vsim, because the DUT and the environment are quite huge. I am looking for a way to be able to develop/debug UVM tests without...
View ArticleClik here to view.
Factors for Component Candidacy ?
Hello , I want to know about component candidacy . Component Candidacy is actually Weight of Component in grams / Area of pads in square inch . But does any other factor play any role in component...
View ArticleReplace symbol for a harness connector
Hello, I am trying to create harness connector myself. Firstly the new symbol I drew was OK to be attached to the connector in Vesys component maintenance. However, when I was synchronizing from wiring...
View ArticlePackaging Error
Hi all,I have recently started to use dxdatabook feature of expedition. But when the existing parts are replaced with dxdatabook parts packaging gives me error saying that there is no such part with...
View ArticleSettings > Display (category)">Re: I cannot see "Xref Annotation" option in Setup > Settings > Display...
Depending on version the name may say Cross Reference instead of Xref Annotation.
View Article.dxf file format error
I am unable to get 1:1 scale drawing in .dxf file format in PADS vx.1.1.please guide me on this RegardsChinmayee
View ArticleRe: .dxf file format error
Check the nits in PADS before importing. If the import looks to small, try to scale it 1000 and see if this helps. You can also scale in your Mechanical CAD and create a new DXF file. Knowledge base...
View ArticleRe: .dxf file format error
Thanks Yan ,From my side i want to make it scaling for 1000 can guide me for this .Actually in metric or inch format its not coming . its showing some error. only mils its taking ....So...
View ArticleRe: Routing signals through a junction slot
Hi John,I'm sorry to say, this looks to me like a defect. When you combine signals, the resulting signal should get properties that exist on ALL the original signals (with the same value). So if even...
View ArticleClik here to view.
Re: .dxf file format error
It is hard to say what maybe going wrong without seeing the file. Please contact Mentor Customer Support and they will be able to help you. Regards, Yan
View Article