Re: Pads With View Net set to a color
KlausAh Ha, missed that, that one set up had that checked I missed it.ThanksBob
View ArticleClik here to view.
Re: PartQuest Link Digi-Key fails
As there were no issues logging into all the individual web sites, I moved off my corporate Windows a/d computer to my Linux desktop and was able to link my Digi-Key account within PartQuest. Not an...
View ArticleHow to define the odb++ setup non functional pad remove to selected layer only ?
I need to define non functional pad remove per selected layer the odb++ setup define the non functional pad remove to all layers . how i define the setup ? thanksrafi
View Articleuser define layout layer not update ?
helloi have a problem when i update cell user define layer in central librarythe cell layer in board layout not update . i need to open the cell in edit mode in board layout and save it to view...
View ArticleRe: disconnecting electrical net to 2 parts in order to defined them as diff...
To disconnect the two nets, you have to find the resistor as component in CES and untogle the series attribute. This will disconnect the electrical net into two nets. Hope this helps Matija
View ArticleRe: Cell without pads
Mike,Your statement regarding Forward to PCB being ignored by Part Lister is not entirely true, assuming you are referring to the xDX Part Lister. Including or excluding parts from PCB and/or BOM using...
View ArticleRe: user define layout layer not update ?
Hello,You did not indicate the release your using since 7.9.X and VX releases work a little differently in this area. Also, you did not say what objects on the user layer that are not updated. However...
View ArticleRe: Trim problem in xPCB Layout VX.1.1
Hello,We made some improvements to Trim in VX.2. Both of these use cases seem fixed with these improvements.Regards,Jerry Suiter
View ArticleIPC Netlist in Vx.1.x
Hi, I'm having troubles generating an IPC netlist like I'm use to in EE7.9.5 and earlier version. I don't have Fablink and we do not plan to buy it only to generate Netlist files. How do you manage to...
View ArticleRe: How to define the odb++ setup non functional pad remove to selected layer...
Hi Rafi, On the ODB++ Output setup form, only a general non-functional pad removal can be defined.For specific layer pad removal you may wish to look at the Padstack processor which will give you more...
View ArticleRe: IPC Netlist in Vx.1.x
Hello Michel,If you were able to export IPC-356 in EE7.9.5, you should also be able to do the same in VX.1.2 release.With Report Writer you can export IPC-356, and with FablinkXE license you can export...
View ArticleRe: How to define the odb++ setup non functional pad remove to selected layer...
Rafi, ODB++ setup is for Fabrication output. Typically fabrication houses when asked to do non-functional pad removal, it is an all or nothing situation. This is how ODB++ setup works.
View ArticleRe: IPC Netlist in Vx.1.x
Hi Jackie, Thanks for your quick answer. In EE7.9.5 I was able to generate IPC-D-356 netlist through Report Writer. In Vx1.1 and Vx1.2 When I try to go under Physical Board Data, instead of letting...
View ArticleRe: IPC Netlist in Vx.1.x
Hi Michel,It sounds like Report Writer GUI does not start for you at all? IPC export is in Tools - Launcher same as it always was.Are you using VX on Linux or the Windows 64-bit install?If Windows...
View ArticleRe: IPC Netlist in Vx.1.x
Hi Jackie, I'm using Window 64 bit and I've installed Mentor Xpedition Vx1.2 package. Can you please, point me where is this installation guide on SupportNet. I've browse for a while now and I...
View ArticleClik here to view.
Re: IPC Netlist in Vx.1.x
Hello Michel, That technote is not reporting a problem, more a statement of fact.Report Writer is a 32-bit application and therefore needs to be installed separately to the 64-bit applications when the...
View ArticleProblem in installing Design Kit
Hi, I tried to install the generic pdk from Mentor but, when I tried to install I recieved the following message. Need your help and suggestion. Thanks. Error: Error in location map:...
View ArticleHotkey (keybinding) for pop out of a hierarchical block in xDx Designer
There is a hotkey for pushing into a schematic of a hierarchical block:"h" -> WVOPushSchematic Is it possible to set a hotkey for going up the hierarchy? Cheers,Martin
View ArticleRe: event epcbMouseEventWheelForward -- Howto?
Hello to allI would like to pick up my question again because I would like to have the Dim Mode and Transparency from Display Control permanently on the mouse wheel in combination wiht shift and ctrl....
View ArticleRe: event epcbMouseEventWheelForward -- Howto?
If there is no solution for the mousewheel I will use the following solution with commandlistener. ( Maybe interesting for somebody )Adding the global Var mouselocX and the function below to the...
View Article