Re: Script to list or highlight nets with protected status
Try this code; Sub Main'This will search all routesegments in design for protected status'if true it adds net to selection status then control "H" add highlight'to selected nets "N" will remove...
View ArticleRe: Tracking Mentor Product licenses in FlexNet Manager
Hi, You appear to have SI BSim GHz, SI LSim GHz plus the "combination product" SI PI Bundle which includes both BSim / LSim and other options e.g. DC Drop. (I'll admit that's a simplified...
View ArticleRe: Pads Logic select parts depeding on ref des prefix or number range etc
Have a look at the "select by pin count" script that comes with PADS. It is almost what you are looking for, but with a minor change it can do what you want.
View ArticleRe: Script to list or highlight nets with protected status
Thank You. I got balled up with whether to select nets, pinpairs or what. I figured there was a least common denominator. David Cox, PC Board Design TeamInstrumentation Laboratory180 Hartwell...
View ArticleRe: Pads Logic select parts depeding on ref des prefix or number range etc
Try enabling just gates in the Selection Toolbar, enter R* in the text box and press enter. This will select all the reference designators matching R. You clan also click the drop-down arrow that...
View ArticleRe: Pads Logic select parts depeding on ref des prefix or number range etc
Hello, Another way is to select certain components are in PADS Layout go into Find dialog and select either Ref. Designator and select "R"; select R1, 4, ,9,12 in Action change to Highlight. Another...
View ArticleRe: Adding Company Logo to Schematic Border Symbol...
Good evening Travis, Many thanks for the detailed response. Following your outline, I was able to get the line and arc elements into Symbol Editor and from there copy and paste into my Border...
View Articledisconnecting electrical net to 2 parts in order to defined them as diff pair
i have 2 nets thet are diff pairs but becouse of theparralel resistor it got electrical net and i can not defind it as diff pairhow can delete the electrical connection and mark it as 2 seperete nets?
View ArticleDesignCapture VX1.2 with Automation Layer?
Hi All, We will switch soon from 7.9.4 to VX1.2 and so I'm wondering, if DC (DesignCapture) VX 1.2 did have an automation layer?I did not found any COM Reference jet.Is there a automation available ?...
View ArticleRe: disconnecting electrical net to 2 parts in order to defined them as diff...
Do you mean you have a SERIES resistor that is forcing a different net name at each end?It seems like a parallel resistor across the two nets of the pair would still leave you two nets to define as "+"...
View ArticleClik here to view.
How to create Vesys database locally??
Hi, Can someone help me to understand? Vesys database is opened by default while launching vesys components, but I would like to use my local database for my training purpose without disturbing company...
View Articlepads VX1.2 3d engine lic file add on's
HI David,I need some help getting the new 3D engine going in PADS VX1.2. I am not finding the add on's to the LIC file m3dplugin and m3dpdfoutput. Can you help
View ArticleRe: disconnecting electrical net to 2 parts in order to defined them as diff...
noyou can not define 2 nets that are parts of one electrical nen in CES as diff pair what i needis to seperete the 2 nets
View ArticleRe: How do I add additional layers in PCB Expedition
Hi Ken, this may be due to the Via definition in the Setup > Setup Parameters > Via Definitions tab.Check the layer range compared with the stackup. If it's wrong, delete the via and...
View ArticleRe: DesignCapture VX1.2 with Automation Layer?
Hi Michi, Design Capture has always had it's own Procedural Interface (DC-PI).Why is automation for DC of interest now that you are switching from 7.9.4 to VX.1.2 ? RegardsJackie
View Articlehow to control RNOM for hybrid connector on Saber netlisting for terminals
All, I want to run export a Saber netlist in CHS. I have a hybrid connector with 2 values for the terminal resistance: connector property value Pin1:...
View ArticleClik here to view.
Re: DesignCapture VX1.2 with Automation Layer?
Hi Jacki, our engineers have some "interesting" ideas.... one of them is to rename everey XSIG net to the name of attached Testpoint. At the Moment I read out this information from pcb. But for this it...
View ArticleRe: Can Capital automate crimping tool settings based on wire terminal pairs?
Hello Sherwin, I assume your question applies to the Capital HarnessXC domain; in this case, while we are not providing out-of-the-box calculations, they may be modeled using a Processing plugin (see...
View ArticleRe: how to control RNOM for hybrid connector on Saber netlisting for terminals
We've moved this from PCB to the Harness Engineering community where it seems to be a better fit.Rob
View ArticleRe: pads VX1.2 3d engine lic file add on's
Hi John, I've moved your question to the PADS layout sub-community where it should get a faster response.
View Article