Expedition Output > Bill of Materials dialog report where it is exporting by Ref Designator sorted, it is displaying one Ref Designator per line, Count for those list of Ref Designator using exporting by Ref Designator sorted is there. Count is only included it with the BOM report exported for Part Numbers list sorted.
I need a BOM with Mechanical parts included in it, All mechanical parts either top most or bottom most. Something similar to below example:
| ITEM (USED WITH)* | QTY | PART NUMBER | DESCRIPTION |
| 1 | 1 | L16904-B | PC BOARD BLANK |
| 3 | 1 | E3768-4 | LABEL 0.25 X 2.50 |
| 4 (D4, Q1)* | 2 | S8025-80 | #6 SELF TAPPING SCREW |
| 5 (D4, Q1)* | 2 | CF000004 | #6-32 X .500 ROUND HEAD MACHINE SCREW |
| 6 (D4, Q1)* | 2 | E106A-13 | # 6 LOCK WASHER |
| 7 | AS REQ | E1868 | THERMAL JOINT COMPOUND |
| 8 (D4, Q1)* | 2 | S18104-14 | HEAT SINK,ALUMINUM,EXTRUDED,2.0 |
| 9 (D4, Q1)* | 2 | S9262-3 | # 6 OR # 8 PLAIN WASHER |
| 10 (D4, Q1)* | 2 | T13746 | #6-32 HEX NUT 3445 |
| REFERENCES | QTY | PART NUMBER | DESCRIPTION |
| C1, C21 | 2 | S20500-5 | CAPACITOR,PPMF,.0015,2000V,BOX |
| C2, C3, C8 | 3 | S13490-186 | CAPACITOR,ALEL,1800,160V,20% |
| C4 | 1 | S20500-2 | CAPACITOR,PPMF,0.47,630V,10%,BOX |
| C5, C18 | 2 | S25029-3SMT | CAPACITOR,SMD,ALEL,100MF,35V,20% |
| C6, C17, C19, C20 | 4 | S25020-27SMT | CAPACITOR,SMD,CER,0.1MF,50V,-20%+80%,Z5U,S0805 |
I am not sure how everyone exporting their BOM's, Could you please help me on this.
Appreciated your help!
Thanks
Lokesh K S