Bundle with with Heatshrink tube

Hi Everyone,

does anyone know if VeSys can calculate the correct  bundle width with insulation when heatshrink is used?

I've tried with heatshrink defined as a tube however, regardless of the value given to the bore, the bundle width with insulation is always  = heatshrink bore + 2 * the heatshrink thickness

e.g  with a 6mm bundle and heatshrink bore = 0, thickness = 0.5 then bundle width with insulation is reported as 1.0mm and with a 6mm bundle and heatshrink bore = 8, thickness = 0.5 then bundle width with insulation is reported as 9.0mm

Thanks

Ted