Hi,
You can see the right side of the symbol the wires are properly snapping to the symbol pins, but on the bottom and left side it is not. What could be the reason? I am having the same problem in another symbol too. Interestingly, when I place the wire to the non snapped pins I am getting the violet star which indicating it is connecting/snapping to the pin.
I am also observed that, when I am using the symbol creating wizard for creating symbols, I am not getting these problem. But when I create from symbol editor with pins imported from csv file, I am getting this problem. I tried changing grid sizes but it did not work. Both my schematic and symbol editor are in 0.010inch grid size.