Re: is it possible to create Reuse with out Net property ??

I'm not sure if I understand the "without Net property" portion of your question, but if you're looking to reuse the 1st DDR components routing, use the steps below.

1. Select the DDR component and it's connected traces/vias segments you want to keep.
2. Make Reuse
3. Right click and choose to Reset Origin, then select the datum of the DDR component
4. Right click and save to file (with the reuse block still selected)
5. Get the (x,y) of the 2nd DDR component
6. Select it and choose the Make Like Reuse
7. Use <ctrl-r> to rotate the reuse block
8. Go to the Reuse properties and enter the (x,y) of the 2nd DDR component
9. Break both reuse blocks